Miners on the Kaspa network have scored a big coup after NiceHash released its first-ever firmware for mining on the Kaspa network. The highlight? It has increased ASIC’s performance by as much as 20%.
Kaspa is ready to improve users’ mining. This is a guidepost for miners looking to earn extra revenue from used equipment. But first, let’s see more about Kaspa.
What Makes Kaspa Special?
Kaspa uses low energy. It uses the exclusive GhostDAG protocol to enhance scalability and allows many blocks to exist on the blockchain. This makes it easy to recommend FPGA solo mining for those who have to reduce energy expenditures while still getting good results. With NiceHash’s new firmware, Kaspa miners can get even more outstanding performance.
There is no doubt that the #NiceHash Kaspa (kHeavyHash) mining pool is the best choice for #Kaspa miners, but what makes it one?
Find out more about the enhanced features that were designed specifically for #ASIC miners and learn how to connect your ASICs maximizing your… pic.twitter.com/m4wO1kkX7H
— NiceHash (@NiceHashMining) October 14, 2024
How Does the NiceHash Firmware Work?
The update comes in the form of firmware optimized for ASICs of the Antminer KS series: KS5 Pro, KS5, KS3—9.4 TH, and KS3—8.3 TH models. This firmware raises the hash speed and lowers the power consumption, making your machine efficient. The intelligent thermal protection feature assists in keeping the ASICs from experiencing very high temperatures.
This is a big deal since overheating can damage your equipment and cut your profits. Using the NiceHash firmware means increasing your hardware’s lifespan while making it perform better.
NiceHash Introduces Kaspa Firmware to Boost ASIC Mining Efficiency by 20%
World’s Leading Bitcoin Hashrate marketplace, NiceHash has released firmware optimized for Kaspa mining. The new firmware has been designed to enhance the performance of the Antminer KS series of ASICs,… pic.twitter.com/PuoHpTNbLy
— EchoeWeb (@Echoeweb) October 16, 2024
Installation Made Easy
If you own an Antminer for Kaspa mining, you might already know about the CVITech control boards. These control boards make it tricky to install custom firmware because they don’t allow for persistent firmware upgrades. But NiceHash has found a workaround with their “Cracker Card.”
The Cracker Card is a small hardware add-on that connects to the CVITech control board. Once it’s in place, you can install the NiceHash firmware over the air, making it much easier to upgrade your system. Large mining operations can request the Cracker Card from NiceHash, and smaller miners (with fewer than 100 machines) can soon buy it online.
Fantastic news for Bitmain @KaspaCurrency miners!
You can now run custom firmware on them using an additional @NiceHashMining cracker card. https://t.co/b0MohWlVP9
— Luke 𐤊 (@elldeeone) October 15, 2024
Fair Pricing for Miners
This new firmware has been well-developed and has a flexible fee rate from NiceHash. The fees depend on how much the author has decided to overclock a machine. This gives the miners some ‘control’—they can choose how much they want to push their machines for that little extra power, and the cost varies.
This firmware works only with the NiceHash mining pool; otherwise, the mining result may not be accurate. If you are not already on it, consider using it before switching to NiceHash.
Elevate your #mining operations with NiceHash!
More tips in this video from @HobbyistMiner as well as some reasons to explain why no matter what hardware you use, #NiceHash is your best choice to stay on top of the game!https://t.co/LzuG4seIoP
— NiceHash (@NiceHashMining) October 17, 2024
What Does This Mean for Kaspa Miners?
This firmware is very helpful to anybody mining on the Kaspa network. The improvement in performance on these procedures and reduced energy use are remarkable. They could increase profits without using sophisticated hardware. However, the need for the Cracker Card and the first offer for NiceHash’s pool only may be an issue for some of the miners.
Anyone keen on mining Kaspa could use NiceHash, which has increased its performance by 20% and is getting ready to provide miners with guides and other crucial help.
Kaspa is the fastest Proof-of-Work coin, using blockDAG for rapid block rates and better decentralization.
Its kHeavyHash algorithm is energy-efficient and perfect for ASIC miners. Launched with no pre-mine, Kaspa is 100% decentralized and community-driven.
Maximize your… pic.twitter.com/7V4DiL1sES
— NiceHash (@NiceHashMining) October 16, 2024
Conclusion
For Kaspa miners, it got a lot brighter out there. There is only one valid reason that any individual vested in the mining community should care about the latest developments from NiceHash: Kaspa-specific firmware. This is good news for players, small and large, for up to 20% better performance, increased efficiency, and added thermal protection inherent in integrated circuits.
Disclaimer
The information discussed by Altcoin Buzz is not financial advice. This is for educational, entertainment, and informational purposes only. Any information or strategies are thoughts and opinions relevant to the accepted levels of risk tolerance of the writer/reviewers, and their risk tolerance may be different from yours.
We are not responsible for any losses you may incur due to any investments directly or indirectly related to the information provided. Bitcoin and other cryptocurrencies are high-risk investments, so please do your due diligence.
Copyright Altcoin Buzz Pte Ltd.
The post NiceHash Unveils ASIC Firmware for Kaspa with 20% Boost appeared first on Altcoin Buzz.
This articles is written by : Fady Askharoun Samy Askharoun
All Rights Reserved to Amznusa www.amznusa.com
Why Amznusa?
AMZNUSA is a dynamic website that focuses on three primary categories: Technology, e-commerce and cryptocurrency news. It provides users with the latest updates and insights into online retail trends and the rapidly evolving world of digital currencies, helping visitors stay informed about both markets.