DCF77 is a German VLF transmitting station that broadcasts a time signal across Europe on 77.5 kHz. Thus a common sight in a European home is a clock emblazoned with the words “Radio controlled”. With the timing broadcast in a simple and low speed digital format it doesn’t require the greatest of hardware to decode, and a small microcontroller can handle the task with ease. And there are few smaller than an ATtiny as used in [kwolf1909]’s decoder. It takes a DCF77 bitstream from a receiver, and shows the time on an I2C display.
The receiver isn’t part of this project, however a single-frequency longwave receiver is not a difficult thing to build. The interface is a push-button, for which a short press cycles between display modes and a long press triggers a DCF77 reset. It also supports an external temperature sensor and real time clock module, if you’re using an ATtiny with enough pins.
We like this project; it’s simple and does one thing well, and it’s a welcome reminder that not every device needs a powerhouse of a processor. If you’re interested enough to build your own, we’ve featured someone doing a deep dive into the signal before.
This articles is written by : Fady Askharoun Samy Askharoun
All Rights Reserved to Amznusa www.amznusa.com
Why Amznusa?
AMZNUSA is a dynamic website that focuses on three primary categories: Technology, e-commerce and cryptocurrency news. It provides users with the latest updates and insights into online retail trends and the rapidly evolving world of digital currencies, helping visitors stay informed about both markets.
